DEPARTMENT OF MECHANICAL AND AEROSPACE ENGINEERING

S4221 Engineering Gateway; (714) 824-8451
William E. Schmitendorf, Department Chair

Undergraduate Programs

Graduate Program

Courses

Faculty

James E. Bobrow: Nonlinear control systems, optimization methods, robotics

Donald Dabdub: Mathematical modeling of air pollution dynamics, parallel computations in environmental sciences

Derek Dunn-Rankin: Combustion, optical particle sizing, particle aero-dynamics, laser diagnostics and spectroscopy

Donald K. Edwards: Heat and mass transfer

Said E. Elghobashi: Direct numerical simulation of turbulent, chemically reacting and dispersed two-phase flows

Carl A. Friehe: Fluid mechanics, turbulence, micrometerology, instrumentation

Faryar Jabbari: Robust and nonlinear control theory, adaptive parameter identification

John C. LaRue: Fluid mechanics, heat transfer, turbulence, instrumentation

Enrique J. Lavernia: Solidification processing of metals, powder metallurgy, intermetallics

Feng Liu: Computational fluid dynamics

J. Michael McCarthy: Kinematic theory of spatial motion, design of mechanical systems, cooperating robots

Kenneth D. Mease: Flight guidance and control, geometric nonlinear control

Melissa E. Orme: Droplet dynamics, fluid mechanics of materials synthesis, netform manufacturing

Dimitri Papamoschou: Compressible mixing and turbulence, supersonic jet noise reduction, diagnostics for compressible flow, acoustics in moving media

Roger H. Rangel: Fluid dynamics and heat transfer of multiphase systems including spray combustion, atomization, and metal spray solidification; applied mathematics

G. Scott Samuelsen: Energy, propulsion, combustion and environmental conflict; turbulent transport in complex flows, spray physics, NOx and soot formation, laser diagnostics and experimental methods; application of engineering science to practical propulsion and stationary systems; environmental ethics

William E. Schmitendorf: Control theory and applications

Athanasios Sideris: Control systems, neural networks

William A. Sirignano: Combustion theory and computational methods, multiphase flows, turbulent reacting flows, flame spread

Harry Skinner: Bio-materials and design of implants, knee joint proprioception, gait analysis, finite element analysis for fracture prediction in bones

Edriss Titi: Partial differential equations, nonlinear analysis

Frederic Yui-Ming Wan: Applied mathematics

Lecturers

Donald J. Barrus: Computer-aided design, computer-aided manufacturing

David J. Dimas: Finite element analysis and structural dynamics

Eugene Evancoe: Design and analysis of signal conditioning and data acquisition circuits

Hai N. Phan: Computer-aided design, computer-aided manufacturing

Mechanical engineers design, manufacture, and control machines ranging from robots to aircraft and spacecraft, design engines and power plants that drive these machines, analyze the environmental impact associated with power generation, and strive to promote environmental quality. To achieve their goals, mechanical engineers use mathematics, physics, and chemistry together with engineering science and technology in areas such as fluid mechanics, heat transfer, dynamics, controls, and atmospheric science. Mechanical Engineering students at UCI learn the problem-solving, modeling, and testing skills required to contribute to advances in modern technology.

Mechanical Engineering undergraduates complete required courses that provide engineering fundamentals and technical electives that allow students to study particular areas of interest. Specializations are available in: Aerospace Engineering, Combustion/Propulsion, Environmental Engineering, Heat Transfer/Fluid Mechanics, Materials Science and Engineering, and Mechanical Systems. Independent research opportunities allow students to pursue other avenues for focusing their studies.

Since mechanical engineering covers a wide spectrum of subjects, many students use the undergraduate curriculum as preparation for further studies in engineering or in areas such as medicine, law, and management.

Aerospace Engineering deals with all aspects of aircraft and spacecraft design and operation, thus requiring the creative use of many different disciplines. Aerospace engineers work on the forefront of technological advances and are likely to be leaders in scientific discoveries.

The undergraduate curriculum in Aerospace Engineering includes courses in subsonic and supersonic aerodynamics, propulsion, controls and performance, light-weight structures, and advanced materials. In the senior capstone course, students work in teams on the preliminary design of a commercial jet transport.

Career opportunities for Aerospace Engineering graduates are in the broad range of aerospace industries, including manufacturers of aircraft, spacecraft, engines, and aircraft/spacecraft components; makers of aircraft/spacecraft simulators; and government research laboratories.

Areas of graduate study and research are the thermal and fluid sciences, combustion and propulsion, mechanical systems and robotics, environmental engineering, and aerospace engineering. Application areas in mechanical engineering include combustion, heat engines, refrigeration, and robotics. Application areas in aerospace engineering include propulsion, aerodynamic design, and guidance and control.

Undergraduate Major in Aerospace Engineering

The undergraduate Aerospace Engineering curriculum includes a core of mathematics, physics, and chemistry. Engineering courses in fundamental areas constitute much of the remaining curriculum.

ADMISSIONS

High School Students: See Admissions in the Undergraduate Study section..

Transfer Students. Preference will be given to applicants with the highest grades overall, and who have satisfactorily completed the following required courses: one year of calculus, one year of engineering physics (with laboratory), one year of general chemistry (with laboratory), one course in computational methods (FORTRAN, Pascal, C or C++), and one year of approved lower-division writing. Courses in linear algebra, differential equations, second-year engineering physics (with laboratory), dynamics, thermodynamics, statics, materials science, and electronics and power systems are required for junior academic standing, and it is recommended that these courses be completed prior to transfer. Dynamics, materials science, thermodynamics, and statics may be offered during the summer session at UCI. Students should work closely with the UCI Office of Admissions and Relations with Schools to ensure that they are enrolled in the appropriate courses.

For further information, contact the School of Engineering Undergraduate Student Affairs Office at (714) 824-4334.

REQUIREMENTS FOR THE BACHELOR'S DEGREE IN AEROSPACE ENGINEERING

Credit for at least 192.5 units including:

University Requirements: See pages 51­55.

School Requirements: See School Requirements in the Undergrduate Study section.

Departmental Requirements:

Mathematics Courses: Mathematics 2A-B-C-D, 3A, and 2F (24 units).

Basic Science Courses: Chemistry 1A-B and 1LA-LB, Physics 5A-B-C-D and 5LB-LC-LD (32.5 units).

Basic Engineering Courses: Engineering E10, E54, ECE72, MAE30, MAE80, and MAE91 (23 units).

Aerospace Engineering Core Courses: Engineering MAE106, MAE108, MAE112, MAE120, MAE130A, MAE130B, MAE135, MAE136, MAE140, MAE146, MAE150, MAE157, MAE158, MAE159, MAE170, and MAE175 (64 units).

Technical Electives: 4 units; students may select, with the approval of their faculty advisor, a technical elective incorporating at least 1 design unit.

Design unit values are indicated at the end of each course description. The faculty advisors and the Undergraduate Student Affairs Office can provide necessary guidance for satisfying the design requirements. Selection of elective courses must be approved by the student's faculty advisor and the departmental undergraduate advisor.

At most an aggregate total of 4 units of 199 or H199 courses may be used to satisfy degree requirements.

PROGRAM OF STUDY

The sample program of study chart shown is typical for the major in Aerospace Engineering. This program is based upon a rigid set of prerequisites, beginning with adequate preparation in high school mathematics, physics, and chemistry. Students who are not adequately prepared, or who wish to make changes in the sequence for other reasons, must have their programs approved by their faculty advisor. Aerospace Engineering majors must consult at least once every year with the academic counselors in the Undergraduate Student Affairs Office and with their faculty advisor.

Undergraduate Major in Mechanical Engineering

The undergraduate Mechanical Engineering curriculum includes a core of mathematics, physics, and chemistry. Engineering courses in fundamental areas fill much of the remaining curriculum; a few electives allow the undergraduate student to specialize somewhat or to pursue broader areas.

ADMISSIONS

High School Students: See Admissions in the Undergraduate Study section.

Transfer Students. Preference will be given to applicants with the highest grades overall, and who have satisfactorily completed the following required courses: one year of calculus, one year of engineering physics (with laboratory), one year of general chemistry (with laboratory), one course in computational methods (FORTRAN, Pascal, C, or C++), and one year of approved lower-division writing. Courses in linear algebra, differential equations, dynamics, thermodynamics, statics, materials science, and electronics and power systems are required for junior academic standing, and it is recommended that these courses be completed prior to transferring to UCI. Dynamics, materials science, statics, and thermodynamics may be offered during the summer session at UCI. Students should work closely with the UCI Office of Admissions and Relations with Schools to ensure that they are enrolled in the appropriate courses.

For further information, contact the School of Engineering Undergradute Student Affairs Office at (714) 824-4334.

REQUIREMENTS FOR THE BACHELOR'S DEGREE IN MECHANICAL ENGINEERING

Credit for at least 195.5 units including:

University Requirements: See pages 51­55.

School Requirements: See School Requirements in the Undergraduate Study section.

Departmental Requirements:

Mathematics Courses: Mathematics 2A-B-C-D, 3A, and 2F (24 units).

Basic Science Courses: Chemistry 1A-B and 1LA-LB, Physics 5A-B-C-D and 5LB-LC-LD (32.5 units).

Basic Engineering Courses: Engineering E10, E54, ECE72, MAE30, MAE52, MAE80, and MAE91 (27 units).

Mechanical Engineering Core Courses: Engineering MAE106, MAE107, MAE115, MAE120, MAE130A, MAE130B, MAE140, MAE147, MAE150, MAE151A-B, MAE170, and MAE189A-B-C (51 units).

Restricted Technical Electives: Engineering MAE108 or MAE180 (4 units).

Technical Electives: 12 units; students may select, with the approval of their faculty advisor, an area of specialization and complete the associated requirements, as shown below.

Specialization in Aerospace Engineering: Completion of a Senior Design Project in this area and three courses selected from Engineering MAE108, MAE112, MAE135, MAE136, MAE158, MAE159, and MAE175.

Specialization in Combustion/Propulsion: Completion of a Senior Design Project in this area and three courses selected from Engineering MAE110, MAE112, MAE135, MAE164, MAE180, and MAE185.

Specialization in Environmental Engineering: Completion of a Senior Design Project in this area and two courses selected from Engineering MAE110, MAE162, or MAE164, and one course selected from CEE173, ChE160, or Earth System Science 201A.

Specialization in Heat Transfer/Fluid Mechanics: Completion of a Senior Design Project in this area and the following three courses: Engineering MAE135, MAE180, and MAE185.

Specialization in Materials Science and Engineering: Completion of a Senior Design Project in this area and three courses selected from Engineering ChE60, ChE153, ChE155A, MAE155B, MAE156, and MAE199 (3 or 4 units).

Specialization in Mechanical Systems: Completion of a Senior Design Project in this area and three courses selected from Engineering MAE171, MAE172, MAE180, and MAE185.

In addition, students must aggregate a minimum of 26.5 design units, at least 3 of which must be obtained in the courses approved as technical electives. Design unit values are indicated at the end of each course description. The faculty advisors and the Undergraduate Student Affairs Office can provide necessary guidance for satisfying the design requirements. Selection of elective courses must be approved by the student's faculty advisor and the departmental undergraduate advisor.

At most an aggregate total of 4 units of 199 or H199 courses may be used to satisfy degree requirements.

PROGRAM OF STUDY

The sample program of study chart shown is typical for the accredited major in Mechanical Engineering. Students should keep in mind that this program is based upon a rigid set of prerequisites, beginning with adequate preparation in high school mathematics, physics, and chemistry. Therefore, the course sequence should not be changed except for the most compelling reasons. Students who are not adequately prepared, or who wish to make changes in the sequence for other reasons, must have their programs approved by their faculty advisor. Mechanical Engineering majors must consult at least once every year with the academic counselors in the Undergraduate Student Affairs Office and with their faculty advisors.

Sample Program of Study -- Mechanical Engineering
FALL	WINTER	SPRING
Freshman
Mathematics 2A	Mathematics 2B	Mathematics 2C
Chemistry 1A, 1LA	Chemistry 1B, 1LB	Physics 5B, 5LB
MAE52	Physics 5A	Breadth
Breadth	Breadth
Sophomore
Mathematics 2D	Mathematics 3A	Mathematics 2F
Physics 5C, 5LC	Physics 5D, 5LD	MAE91
MAE30	MAE80	ECE72
E10	E54	Breadth
Junior
MAE115	MAE106	MAE120
MAE130A	MAE130B	MAE170
MAE140	MAE150	Breadth
MAE147	Breadth	Breadth
Senior
MAE151A	MAE151B	MAE107
MAE189A	MAE189B	MAE189C
MAE108 or MAE180	Technical Elective	Technical Elective
Technical Elective	Breadth	Breadth
Breadth	Breadth

Mechanical Engineering and Aerospace Engineering Double Major

Students can complete the double major in Mechanical Engineering and Aerospace Engineering by following the program outlined below. The double major requires that MAE159 be substituted for either MAE189A, B, C or MAE151A, and that MAE108 be used for the Mechanical Engineering Restricted Technical Elective. In addition, four breadth courses not shown in the table must be taken either during any summer term(s) or during a thirteenth quarter.

Sample Program of Study -- Mechanical and Aerospace Engineering
FALL	WINTER	SPRING
Freshman
Mathematics 2A	Mathematics 2B	Mathematics 2C
Chemistry 1A, 1LA	Chemistry 1B, 1LB	Physics 5B, 5LB
MAE52	Physics 5A	Breadth
Breadth	Breadth	Breadth
Sophomore
Mathematics 2D	Mathematics 3A	Mathematics 2F
Physics 5C, 5LC	Physics 5D, 5LD	ECE72
E10	MAE80	MAE91
MAE30	E54	Breadth
Junior
MAE115	MAE106	MAE107
MAE130A	MAE130B	MAE120
MAE140	MAE150	MAE146
MAE147	MAE170	MAE185 or MAE152
Senior
MAE108	MAE112	MAE159
MAE135	MAE151B	MAE157
MAE136	MAE158	Breadth
MAE151A	MAE175	Breadth

Graduate Study in Mechanical and Aerospace Engineering

The Mechanical and Aerospace Engineering faculty have special interest and expertise in three thrust areas: systems and design, fluid and thermal sciences, and combustion and propulsion. Systems and design faculty are studying robust control, parameter identification for flexible space structures, computer-aided design, and robotics--including mechanical design, robot navigation, and coordination of multiple robot systems. Thermal and fluid sciences encompasses multiphase heat transfer and fluid flow, convection, turbulent transfer, atmospheric processes, and supersonic shear flows. Combustion and propulsion research efforts include studies of the processes of fuel-air mixing, turbulent transport, liquid sprays, and the formation of gaseous and solid pollutants in gas, liquid, and coal-fueled combustion systems, including gas turbines, boilers, incinerators, and rockets.

Aerospace engineering research efforts combine specialties from each of the three thrust areas as well as study in propulsion, aerodynamics, trajectory optimization and guidance, and control of flexible space structures.

Programs of study leading to the M.S. and Ph.D. degrees in Mechanical and Aerospace Engineering are offered.

MASTER OF SCIENCE DEGREE

Two plans are available to pursue study toward the M.S. degree: a thesis option and a comprehensive examination option. Opportunities are available for part-time study toward the M.S. degree.

Plan I: Thesis Option

The thesis option requires completion of 36 units of study; the completion of an original research project, the writing of the thesis describing it; and approval of the thesis by a thesis committee. This plan is available for those who wish to gain research experience or as preparation for study toward the doctoral degree. To complete the required 36 units, students must complete a minimum of 20 units in graduate courses numbered MAE200­289, and 16 units from unrestricted courses of which not more than eight units are in MAE296 and not more than five units are in other courses numbered MAE291­299. The courses planned for study must be approved by a faculty advisor and the graduate advisor.

Plan II: Comprehensive Examination Option

The comprehensive examination option requires completion of 36 units of study, 24 units of which must be from graduate courses numbered MAE200­289. With a faculty advisor approval, the remaining 12 units can include execution and documentation of a research or design project (which can count for up to seven of the 36 required units). The courses planned for study must be approved by a faculty advisor and by the graduate advisor.

DOCTOR OF PHILOSOPHY DEGREE

The doctoral program in Mechanical and Aerospace Engineering is tailored to the individual needs and background of the student. The detailed program of study for each Ph.D. student is formulated in consultation with a faculty advisor who takes into consideration the objectives and preparation of the candidate.

Within this flexible framework the Department maintains specific guidelines that outline the milestones of a typical doctoral program. All doctoral students should consult the Departmental Ph.D. guidelines for program details, but there are several milestones to be passed: admission to the Ph.D. program by the faculty; completion of six non-research courses beyond M.S. degree requirements; passage of a preliminary examination or similar assessment of the student's background and potential for success in the doctoral program; course work; meeting departmental teaching requirements, which can be satisfied through service as a teaching assistant or equivalent; research preparation; formal advancement to candidacy through a qualifying examination conducted on behalf of the Irvine division of the Academic Senate; development of a research proposal; completion of a significant research investigation, and completion and defense of an acceptable dissertation. There is no foreign language requirement. The degree is granted upon the recommendation of the Doctoral Committee and the Dean of Graduate Studies. A program of part-time study is not available for the Ph.D. Doctoral programs must be completed in seven calendar years from the date of admission.

Before seeking admission, Ph.D. applicants are encouraged to communicate directly and in some detail with prospective faculty sponsors. The student's objectives and financial resources must coincide with a faculty sponsor's research interests and research support. Financial aid in the form of a teaching assistantship or fellowship may not cover the period of several years required to complete the program. During the balance of the period the student will be in close collaboration with the faculty research advisor.

Click on the "Next" button for courses in Mechanical and Aerospace Engineering.